[Translate to English:] MATHY-M Motoröl Addtiv

TÜV-Tested Effectiveness in Reducing Wear

MATHY-M Motor Oil Additive

MATHY-M guarantees increased driving pleasure and lower costs

MATHY-M is a high-performance motor oil additive that significantly increases the reliability and service life of car engines. The addition of MATHY-M to the engine reduces wear and increases the performance of the machine.

MATHY-M has continuously been tested and certified by TÜV and other institutes since 1994. MATHY-M is free of solid substances and usable in all mineral, partly or fully synthetic motor oils, ranging from 0 to 60 SAE. It is suitable for all petrol / gasoline and diesel engines with catalyst and diesel particle filters (PDF); it is also compatible with AdBlue.

  • Cleans engines
  • Reduces wear
  • Extends service life of the engine
  • Reduces noise
  • Improves start behavior

Areas of Application

  • Any type of engine (petrol / gasoline, diesel, Wankel, and gas engines)
  • Excessive fuel consumption
  • High loads and/or excessive wear
  • Noisy and rough engine running as well as vibrations
  • Compatible with AdBlue

Dosage

For normal use add 10% MATHY-M motor oil additive to the engine oil.
Example: Total net quantity of the engine 4.0 l: 3.600 ml motor oil according to manufacturer’s instruction + 400 ml MATHY-M.

Under heavy loads
Add 20% MATHY-M motor oil additive to the engine oil at above average stress level (e.g. heavy loads, turbocharged engines, pulling trailers, excessive short-distance operation etc.).
Example: Total net quantity of the engine 4.0 l: 3.200 ml motor oil according to manufacturer’s instruction + 800 ml MATHY-M.

Dosage instructions have to be followed.

Application

For car engines with a mileage ofmore than 30.000 km we recommend a cleaning phase: Discharge 10% of the filling quantity from the old engine oil and refill the removed quantity with MATHY-M After driving 500 to 700 km change the old engine oil, if possible as long as it is warm. After draining, fill the engine with a mix ratio of at least 10% MATHY-M and 90% Motorenöl nach Herstellervorgabe. engine oil according to the manufacturer's instructions. (At a capacity of 4.0 liters: 3,600 ml motor oil according to manufacturer's instruction +400 ml MATHY-M)

* The possible oil change interval of maximum 60,000 km refers to a normal driving and a mileage per year of 30,000 km and more, which is optimal for the engine! Frequent driving of short distances (distances less than 20 km) or use of alternative fuels can negatively affect the engine oil. Therefore, check the oil condition regularly and in case of doubt change the oil prematurely. We recommend a complete oil change after max. 60,000 km or at the latest after 4 years. Important: Change the oil filter along with the oil at the intervals recommended by the car manufacturer.

MATHY-M

Motor Oil Additive

Reduction of wear; test according to DIN 51834-2

Annually, TÜV Thüringen certifies the effectiveness of MATHY-M: Reduction of wear in current engine oils tested in a comprehensive test.

Available in the following trading units: 0.5 l, 1.0 l, 2.5 l and 5.0 l

from 29,90 € - order now

Free shipping on orders over 80, - € within Germany and Austria

All Product Sets are free of shipping costs within Germany and Austria. Save more and receive 10 % discount on your order of €300 or more!

  • Made in Germany Buy directly from the manufacturer
  • Certified since 1994 Our quality is measurable
  • Fast Delivery Usually within 48h
  • Pay conveniently By invoice, PayPal, direct debit
  • Secure shopping 128-bit SSL encryption